Model No.: kj-123
Decoiler ----flatting----clamp deliver---- punching---- roll forming----cut-to-length
2. Equipment capabilities
1). It can according to the need to produce the steel width
2). (60mm≤ -≤ 860mm) many kinds of specification electric cable bridges and other structure product.
3). Product speed by punching: 2.5-5m/min
4). Continuous rollforming speed: 10-15m/min
5). Material thickness: 1-2mm
6). Material require: Q235 cold roll steel
7). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
3. Main composition of machine
This unit consists of the decoiler, ML900 flatting, 200 punch, die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, recoiler, electrical control cabinet; etc.
4. Each part major technical parameters
4.1 Drive decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.
1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
2) Flatting bound: Material thickness 1-2mm, material width 100-860mm
3) Drive power: 5.5kw frequency conversion electromotor
4) Speed reducer model: ZQ250
5) Flatting speed: 3-10 m/min
6) Parenthesis up and down a pair of fortified wheel
4.3 continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench
4.4 servo feeding set
1. Ervo electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servometer
4.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets
4.7 main roll forming machine Size Please don't hesitate to tell us what do you want . we can make machine ,based on your size. The service can scale up or down, based on customer demand. Warranty
|Rack structure||Dragon Gate type memorial arch frame|
|Forming frame||16 sets|
|Forming variety||Bridge frame|
|Material max width||860mm|
|Material max thickness||≤ 2.0mm|
|The diameter of the roller axis||85mm|
|Roll mould material||Gcr15|
|Drive type||30kw frequency conversion electromotor|
Not exactly, it depends on the machine.
2. Do you have after sales support?
Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.
3. How to visit your company?
We can pick you up from Shanghai airport or railway station. For example;Fly to ShangHai (PVG)(SHANGHAI Pudong International Airport IATA: PVG, ICAO: ZSPD) airport: we can pick up you.( It's about 1.5 hours by car from here )
4. What can you do if the machine broken?
Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken parts free ,but you need pay the express cost yourself.if after warranty period,we can through negotiation for to solve the problems,and we supply the technical support for the whole life of the equipment.
5. Can you be responsible for transport?
Yes,please tell us the destination port or address.we have rich experience in transport.
6. You are trade company or factory?
We are Manufacturer.
7. Why your price is higher than others?
As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem.
8. How long the machine could be made?
Normally speaking, welded pipe making machine could be made out with 45 working days. If you need machines in hurry, we can make it for you less than a month.
9. Do you have overseas engineers?
Yes, we not only provide overseas engineers, but also provide technical training.
10. Do you provide customized?
Sure,we can design the equipment according to the data of the structural section you provide.
We are professional sheet metal forming machine designer and manufacturer. After-Sales Service Pre-sale Service 1. Send you invitation letter, If you wanna visit our factory and check the machines. 2. Good Quality Manufacturer competitive price Quick Response Reliable Service for you. Selling Service 1. Short delivery time after deposit 30-40 days. 2. Email you the production schedule and make prompt delivery for you. 3. We will count the cheapest shipping cost and fastest forwarder for you and send documents promptly. 4. Always be here for your service 12 hours per day. After-sale Service 1. We welcome all feedback about our products and prices and services from our customers. 2. Any questions, please contact with us freely by E-mail or Telephone. Our Services Delivery time 35 workdays after down payment received Containers: one 40"GP Payment Methods Money Transfer, PayPal, Money Gram, Bank Transfer ,Escrow way of payment T/T OR Western Union
Installation and training;
If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
Without visiting, we will send you user manual and video to teach you to install and operate. (operating manual)
If buyer needs our engineer to go to your local factory, please arrange board and lodging and other necessary things.
Products Warranty: 12 month, and we will provide If there is any problem found of the machine, we will repair it for free in one year. the technical support for the whole life of the equipment. 12hours technical support by email or calling What's more, equipment can be specially designed and manufactured at customers' requirements. Fine quality as well as low price.This new product is to the taste of world market. Products Warranty: 12 month, and we will provide the technical support for the whole life of the equipment. Company Information Kejo Roll Forming Machine Co., Ltd.
Contact person: Amy Li
Mobile tel: 0086 15618062281
Contact me to get more information Contact us if you need more details on Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cable Tray Roll Forming Machine、Perforated Type Cable Tray Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Cable Tray&Ladder Forming Machinery
Premium Related Products